Table of Contents
Advertisement
Handle Zoom Speed F
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to "FIX".
[Setting Values: 1 to 8 (R 5)]
* When the supplied lens is not attached, "---" is
displayed and selection cannot be made.
AF Speed F
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Assist F
For setting whether to shift the auto focus point
when the focus ring is turned during Auto Focus
(AF).
* When the supplied lens is not attached, "---" is
displayed and selection cannot be made.
Area:
0
This option allows you to shift the auto focus
point to the left, center, right, or near and far
directions by turning the focus ring during AF.
Selecting this option displays the
the area.
Far/Near:
0
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
[Setting Values: Area, Far/Near, ROff]
(A P54 [AF Assist Function F] )
Memo :
This setting is effective only when the [AUTO
0
FOCUS/11] switch is set to "ON".
The manual focus adjustment mode is
0
temporarily activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
Camera Function Menu
110
Remote Func. Change F
For setting whether to enable focus operation when
performing zooming from a wired remote control.
[Setting Values: Zoom → Focus, ROff]
Memo :
This function is effective only if a wired remote
0
control is connected to the [REMOTE2]
terminal.
Lens REC (Displayed only when KA-F790G is
connected) A B
For setting the function of the [REC] button on the
lens.
Intercom:
0
Functions as an ON/OFF button for headset
calls.
Pressing the button each time toggles headset
call between on/off.
Press and hold down the button to turn on
headset call. Release to turn off.
Rec:
0
Functions as a recording button to start or stop
recording.
icon in
[Setting Values: Intercom, RRec]
User Switch Set...
For specifying user button related settings.
(A P111 [User Switch Set Item] )
FULL AUTO...
For setting which feature to set to auto when the
[FULL AUTO] switch on the camera recorder is
"ON".
(A P113 [FULL AUTO Item] )
Advertisement
Table of Contents
