Table of Contents
Advertisement
Audio Output during
Recording
You can check the recorded audio from the
0
monitor speaker or the earphone connected to
the [PHONES] terminal.
(A P163 [Connecting a Earphone] )
Adjust the volume of the monitor speaker or
0
earphone using the [MONITOR] adjustment
knob.
Memo :
The warning tone will not be output during
0
recording.
Note that raising the volume of the monitor
0
excessively may cause howling with the camera
mic.
Time Code and User's Bit
Time code and user's bit data are recorded with the
video in this camera recorder.
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Audio Output during Recording
72
Displaying Time Code and User's Bit
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1 Set [Main Menu] B [LCD/VF] B [Display
Settings] B [TC/UB] to "On".
(A P123 [ TC/UB ] )
When "TC" or "UB" is selected, time code or
user's bit data is displayed respectively on the
display screen.
F F E E D D 2 0
0 0 : 0 0 : 0 0 . 0 0
2 Select the display using the [TC DISPLAY]
switch on the LCD monitor.
Select time code display ([TC]) or user's bit
display ([UB]).
Memo :
Values recorded on the SD card is displayed in
0
Media mode.
00: 00: 00.00
Jan 24 ,2014
12 :34 : 56
5 . 6f t
ND 1 /64
AE
6
+
0
dB
F1. 6
P 13000K
1/ 100
Advertisement
Table of Contents
