Table of Contents
Advertisement
Then press "ALT+F1" to switch back to installation screen and select "No" to
continue.
4. Continue the installation as usual. You can refer to Fedora Linux installation
guide. Make sure you have finished the next step before system reboot.
5. When installation finishes and prompts you to reboot the system, press
"CRL+ALT+F2" to the shell and type the following commands:
# chroot /mnt/sysimage
# mount /dev/fd0 /mnt
# sh /mnt/fedora-install-step2.sh
# umount /dev/fd0
# exit
Then switch back to console 1 and finish the installation.
3 - Installing RR26xx driver on an Existing System
If you use a SCSI adapter to boot your system, you must make sure the RR26xx
controller BIOS will be loaded after that adapter's BIOS. If not, try to move it to
another PCI slot. Otherwise you may be unable to boot up your system.
Step 1 Obtain the Driver Module
You can extract the module file from the file modules.cgz on the driver disk. Using the
following commands:
# mount /dev/fd0
# cd /tmp
# gzip -dc /mnt/floppy/modules.cgz | cpio -idumv
Driver modules for all supported kernel versions will be extracted. You can find the
driver module for your running kernel under the directory that matches your kernel
version.
Linux(Fedora,Red Hat,SuSE) Driver Support
6-5
Hide quick links:
Advertisement
Table of Contents
