Draining & Storing Hose - Hoover SteamVac Y Series User Manual

20
21
C
22
23
E
D
24
F
8
A
B
The handle must be in the upright position in order to
get cleaning solution through the hose.
Drain the hose
When finished using the hose and tool, remove water
from the hose.
 Turn carpet cleaner on and hold end of hose up for
several seconds (A). Do not press trigger. (Fig. 20)
 Turn carpet cleaner off and unplug it.
 Hold hose connector in sink and press trigger to
remove solution from hose (B) (Fig. 20).
Store hose
Unplug carpet cleaner from electrical outlet.
® Hook hose connector (C) into caddy (Fig. 21).
® Wrap hose around caddy in a counterclockwise
direction (Fig. 22).
® Hook tool connector (D) and SpinScrub™ tool (E)
onto caddy (Fig. 23).
® Snap upholstery tool (F) into caddy (Fig. 24).