Stair/upholstery nozzle has a built-in brush to help provide
the scrubbing action some spots may need for removal (Fig.
Note: Hose wand must be returned to floor nozzle storage
position in order for cleaner to be used in the upright
position for floor cleaning.
Your carpet cleaner may be transported easily by the
convenient carrying handle (A) (Fig. 13).
Using the hose and tool
Using the hose
Place handle in upright, storage position.
Press on the tab (A) to remove the hose wand (B)
from the floor nozzle (C) (Fig. 14).
Slide tool (D) onto end of hose wand. Snap tool over
bump (E) on wand (Fig 16).
To remove tool: Push forward and up on tab (F) (Fig.
16). Slide tool off hose wand.
Store hose and tool
To return hose wand to storage position, align bump (E)
on wand with hole (G) in nozzle and push in firmly until
you hear a snap (Fig. 17).
Store upholstery nozzle (H) over projection (I) on back of
cleaner for storage (Fig. 18).