Hoover SteamVac Y Series User Manual page 12

41
42
43
44
D
E
F
45
12
Routine care for your Carpet Cleaner
Clean the nozzle
Unplug carpet cleaner from electrical outlet.
A
® Remove solution and recovery tanks to prevent possible leaks.
® Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
® Wipe debris off nozzle and front of cleaner with a damp cloth.
® Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
B (B) up from bottom of cleaner (Fig. 42).
® Press on upper portion of nozzle to snap in place.
Clean the brushes
Unplug carpet cleaner from electrical outlet.
® Remove solution and recovery tanks to prevent possible leaks.
® Tilt cleaner back so handle rests on the floor.
® Pull brush assembly firmly to remove (Fig. 43).
® Rinse brushes under running water.
® Align posts (C) on brush assembly with slots (D) in cleaner
(Fig. 44).
® Turn brushes slightly to align square post (E) with square hole
(F) in cleaner (Fig. 44).
® Press brush assembly firmly and snap in place.
C
Clean the brush filter
Unplug carpet cleaner from electrical outlet.
® Remove solution and recovery tanks to prevent possible
leaks.
® Tilt cleaner back so handle rests on the floor.
G
® Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
® Wipe debris off filter.
® Slide filter back into place.