Attach Hose Rack; Storing Hose & Tools; To Reattach Tool Cover - Hoover SteamVac F5881-900 Owner's Manual

Ultra/plus/deluxe series with automatic tool conversion
Table of Contents

Advertisement

t
Attach
hose
rack
[]Remove
tool and taped screw from
rack.
Insert projections on rack into slots on
back of cleaner.
Slide rack down into place. Insert
screw at (D) and tighten with a
Phillips screwdriver.
Storing
hose & tools
Store hose on rack by first position-
ing hose in front section of clip.
Then continue wrapping
hose as
shown snapping
end of hose con-
nector into clip.
Position tool in holder at base of
cleaner and snap it into place as
shown at arrow.
i,U
Slide bare floor attachment
into
holder as shown.
For Plus*
or
Ultra**
models
The
owered hand tool** is shipped
plastic bag for protection.
Remove the bag before using the tool
by first opening tool door.
To remove tool** (A), pull it down
outward.
To reposition the tool, reverse this proce-
dure.
To store stair/upholstery
nozzle* (B),
open tool door, place nozzle in bracket
and fit it securely into positiion.
To
remove, reverse this procedure.
How
to reattach
tool
cover
The tool cover is designed with a
break-away
feature which allows it
to snap free if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.

Advertisement

Table of Contents
loading

Table of Contents