Attaching The Hose; Selecting & Attaching Tool - Hoover SteamVac Y Series User Manual

Attach the hose
Unplug carpet cleaner from electrical outlet.
 Place handle in upright position.
 The hose and tool caddy can be removed from the
cleaner if you desire.
 Remove hose from tool caddy.
 Open hose door (A) on back of carpet cleaner (Fig. 13).
 Align hose connector with hose and solution ports (C)
(Fig. 14).
 Push hose into port and lock in place.
 To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
 Close hose door (A) tightly (inset).
Select tool
16
SpinScrub™ hand tool
• Rotating brushes
• Use on carpet to clean
spots, small areas or
stairs
Attach tool
Unplug carpet cleaner from electrical outlet.
 Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
 To remove tool: Push forward and up on latch (F) (Fig. 19).
Slide tool off hose.
17
Stair/Upholstery nozzle
• Built-in brush
• Use on upholstery
13
14
A
C
15
D
A
18
F
E
Continued §
A
B
19
7