Call Channel Programming; Lock Function; Monitor Function - Icom IC-M73EURO Instruction Manual

4
BASIC OPERATION
■The Call channel key is used
to select Channel 9* by default.
However, you can program
your most often-used channel
in each channel group for quick
recall.
* The channel may differ, depending on the transceiver version.
q Hold down for 1 second several
times to select the desired channel
group
(USA, INT, CAN, ATIS)
grammed.
w e H old down for 1 second to select
e
the Call channel.
• "CALL" and Call channel number ap-
pear.
e Hold down again for 3 seconds
til a long beep changes to 2 short beeps)
to enter the Call channel program-
ming mode.
• The Call channel number to be pro-
grammed blinks.
r e P ush to select the desired
e YZ
channel.
t Push to program the displayed
12 12
channel as the Call channel.
• The Call channel number stops blinking.
to be pro-
(un-
■This function electronically
locks all keys
(except for , and )
prevent accidental channel
changes and function access.
➥ Push for 1 second to turn the lock function ON or OFF.
Hold down
for 1 second
■The monitor function releases
the noise squelch mute to
check the volume level. See
page 27 for details of the
monitor switch action.
➥ Hold down for 1 second to activate the monitor func-
tion.
• "" and "" appear and audio is heard.
Hold down
for 1 second
to
Appears while the lock
function is in use.
Appears while the
monitor function is
in use.