Channel Naming Function; Channel Name Programming; Usable Characters - Icom IC-M73EURO Instruction Manual

■ Channel naming function

The IC-M73/IC-M73EURO can assign up to 10-character
channel names for each operating channel, including each
weather channel. This provides easy recognition of the
channel in use, or station names.
When shipped from the factory, the IC-M73/IC-M73EURO
is programmed with default names for each VHF marine
channel. These defaults can be changed, if desired.
D Usable characters
(=) (,) (+) (–) (,)
(4) (5) (6) (7) (8)
(D) (E) (F) (G) (H)
(N) (O) (P) (Q) (R)
(X) (Y) (Z) (a) (b)
(h) (i) (j) (k) (l)
(r) (s) (t) (u) (v)
(/) (0) (1) (2) (3)
(9) (Space) (A) (B) (C)
(I) (J) (K) (L) (M)
(S) (T) (U) (V) (W)
(c) (d) (e) (f) (g)
(m) (n) (o) (p) (q)
(w) (x) (y) (z)
FUNCTION MODE OPERATION
D Channel name programming
q Push [Y]/[Z] to select a channel to
program.
• Hold down [CH/WX•U/I/C] for 1 sec-
ond to select a channel group, if nec-
essary.
w Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
channel naming function.
• "CH NAME" appears.
e e P ush [H/L•LOCK] to edit the chan-
e
nel name.
• The 1st character of the currently pro-
grammed name blinks.
r Push [Y]/[Z] to select a character.
t Push [CH/WX•U/I/C] to move to
the right; then push [Y]/[Z] to se-
lect a character.
• Push [SCAN•DUAL] to move to the
left.
y Continue until the desired charac-
ters have been selected, then push
[H/L•LOCK] to return to normal op-
eration.
Deleting a channel name (All clear):
While selecting the desired channeI
name in the channel name editing
mode, push [FAV•★] to delete the se-
lected channel name.
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21