Automatic Recording Function (Depending On Versions) - Icom IC-M73EURO Instruction Manual

■ Automatic recording function (Depending on versions)

When this function is turned ON, the transceiver automati-
cally records the received signal into the memory.
The maximum recording time is 60 seconds.
• The transmit signal cannot be recorded.
• If a signal less than 60 seconds is recorded, the next recorded
signal is added into the same data.
• The recording threshold level can be set in the set mode. See
page 30 for details.
NOTE: Even if you turn OFF the transceiver, this function re-
mains ON.
• Example— Automatic recording
[Less than 60 seconds]
Starts recording Stops recording
Example: 40 seconds
[More than 60 seconds]
Starts recording
60 seconds
These contents
After 60 seconds has passed from
won't be recorded.
starting the automatic recording,
this function records the 60 seconds
before stopping to record.
When receiving a signal for 60
seconds or less, this function
records all contents.
Stops recording
FUNCTION MODE OPERATION
q Push [F] to enter the function
mode, and then push [Y]/[Z] to
select the automatic recording
function.
• "A-REC" appears.
w e P ush [H/L•LOCK] to turn the
e
function ON or OFF.
• The automatic recording icon ap-
pears when the function is turned
ON.
• After pushing [H/L•LOCK], exits
the function mode.
e e W hen a signal is received, the
e
transceiver automatically starts
recording.
• "REC" appears while recording.
• The recording will automatically
stop when the received signal dis-
appears, or the received signal strength becomes weaker
than the set threshold level in the set mode
(p. 30).
7
1
2
3
4
5
6
Automatic recording
mode appears.
7
8
Automatic recording
icon appears.
9
10
11
12
"REC" is appeared
while recording.
13
14
15
16
19