3. Check the turn signal relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-79.
OK ↓
4. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
The neutral indicator light fails to come.
1. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-71.
OK ↓
2. Check the relay unit (diode).
Refer to "CHECKING THE DI-
ODES" on page 8-81.
OK ↓
3. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
The oil level warning light fails to come.
1. Check the oil level switch.
Refer to "CHECKING THE OIL
LEVEL SWITCH" on page 8-86.
OK ↓
2. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
SIGNALING SYSTEM
NG →
Replace the turn signal relay.
NG →
Properly connect or repair the signaling
system's wiring.
NG →
Replace the neutral switch.
NG →
Replace the relay unit.
NG →
Properly connect or repair the signaling
system's wiring.
NG →
Replace the oil level switch.
NG →
Properly connect or repair the signaling
system's wiring.
8-25