Checking The Cooling System; Changing The Coolant - Yamaha XVS13AWC Service Manual

Yamaha motorcycle service manual
Hide thumbs Also See for XVS13AWC:
Table of Contents

Advertisement

NOTE:
To add coolant, remove the coolant reservoir
cap cover "1" and coolant reservoir cap "2".
1
2
ECA13470
CAUTION:
• Adding water instead of coolant lowers the
antifreeze content of the coolant. If water is
used instead of coolant check, and if nec-
essary, correct the antifreeze concentra-
tion of the coolant.
• Use only distilled water. However, if dis-
tilled water is not available, soft water may
be used.
3. Install:
• Coolant reservoir cap
• Coolant reservoir cap cover
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check:
• Coolant level
a
b
3-17
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
EAS21120

CHECKING THE COOLING SYSTEM

1. Remove:
• Front cylinder exhaust pipe
Refer to "ENGINE REMOVAL" on page 5-1.
2. Check:
• Radiator cover "1"
• Radiator "2"
• Radiator inlet hose "3"
• Radiator outlet hose "4"
• Radiator outlet pipe "5"
Cracks/damage → Replace.
Refer to "RADIATOR" on page 6-1.
3
3. Install:
• Front cylinder exhaust pipe
Refer to "ENGINE REMOVAL" on page 5-1.
EAS21130

CHANGING THE COOLANT

1. Remove:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Muffler
• Coolant reservoir cover
Refer to "ENGINE REMOVAL" on page 5-1.
2. Remove:
• Radiator cap "1"
1
ENGINE
2
5
4
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvs13ctwcXvs13ctwXvs13aw

Table of Contents