Sharp AR-M256 Service Manual page 67

26-2
Purpose Setting
Function Used to set whether the automatic detection of paper
(Purpose) size is made or not.
Section Paper feed
Item Specifications
Operation/procedure
1. Select the item with the 10-key and press the [START] key.
Used to set the automatic size detection.
2. Set whether automatic detection of paper size is made or not with
the 10-key.
Setting to detect B4/Legal as FC
1:B4/LG,FC 0: B4 legal is detected as B4 legal. (Default)
1: B4 legal is detected as FC.
This setup detects Letter as A4 in the inch series and
A4 as Letter in the AB series.
2:A4<->LT
0: Detection disable (Default)
1: Detection valid
8.5" x 13" detection valid/invalid setup
Set value Setup
0 Detection invalid
1 Detection valid
Detection size when 8.5" x 13" document/paper is used.
Employed Destina
unit tion
AB
series
Document
Docu
table/
ment
RSPF
Inch
series
Machine All
paper feed destina
cassette tions
AB
series
Paper
Manual
paper feed
tray
Inch
series
A4/LT (8.5" x 11") detection enable/disable setup
In the inch series, Letter is detected as A4; in the AB series, A4 is
detected as Letter.
Set value Setup
0 Detection invalid
1 Detection valid
Remarks
Default
Set value
Document
0 1
size
(Invalid) (Valid)
FC FC
B4
(8.5" x 13") (8.5" x 13")
LG FC
B4
(8.5" x 14") (8.5" x 13")
FC
B4 B4
(8.5" x 13")
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
WLT WLT
B4
(11" x 17") (11" x 17")
– Set with key operations.
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
B4 B4 B4
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
B4 B4 B4
Remarks
Default
AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 25
Detection size when A4/LT (8.5" x 11") document/paper is used.
Employed Destina
unit tion
AB
series
Document
Docu
table/
ment
RSPF
Inch
series
Machine All
paper feed destina
cassette tions
Paper
Manual All
paper feed destina
tray tions
26-3
Purpose Setting
Used to set the specifications of the auditor. Setting
Function
must be made depending on the use condition of the
(Purpose)
auditor.
Section Auditor
Item Specifications
Operation/procedure
Select the mode corresponding to the auditor specification mode with
the 10-key.
Item Content
0 P10 Built-in auditor mode
1 VENDOR Coin vendor mode
2 OTHER Others
When "1: VENDOR (Coin vendor mode)" is set, the following three
items of key operation setting are changed.
1) Set the LCD backlight change inhibit to "1: OFF (Enable)."
2) When SIM 26-6 destination setting is set to "0: Japan," duplex copy
inhibit setting must be set to "0: ON (Inhibit)."
3) Set the sort automatic selection to "0: OFF (Disable)."
Set value
Document
0 1
size
(Invalid) (Valid)
LT
A4 A4
(8.5" x 11")
LT LT
A4
(8.5" x 11") (8.5" x 11")
LT
A4 A4
(8.5" x 11")
LT LT
A4
(8.5" x 11") (8.5" x 11")
Set with key
–
operations.
Regardless of the
–
simulation setup.
Setting
Default
range
0-2 0