B. Developing Section - Sharp AR-M256 Service Manual

Assembly* Press the center of the separation pawl and install it.

B. Developing section

(1) Developer
AR-M256/M257/M258/M316/M317/M318/5625/5631 DISASSEMBLY, ASSEMBLY AND MAINTENANCE 10 - 5
∗
(2) DV seal/side seal
[DV seal attachment procedure]
2
1
1) When attaching the DV side Mylar, check the position shown in the
2) When attaching the DV side seal, check the position shown in the
∗
When assembling, check that the hook is securely engaged in two
positions.
figure below and attach it properly.
Attaching reference
figure below and attach it properly.
(First of all, attach the DV side Mylar.)
Attaching reference
Side seal
N2
The attachment reference is the same, but the area of the N2
shape is reduced to half as shown with the red square in the above
figure.
Be sure to attach the DV side sheet so that the notch is on the out-
side.
∗
Side seal
N