C. Operation Panel - Sharp AR-M256 Service Manual

C. Operation panel

No. Name
1 Touch panel
2 Mode select keys and indicators
[COPY] key
[PRINT] key/ONLINE indicator/
DATA indicator
[SCAN] key/DATA indicator
[FAX] key/LINE indicator/
DATA indicator
3 [JOB STATUS] key
4 [CUSTOM SETTINGS] key
5 Numeric keys
6 [ACC.#-C] key
7 [#/P] key
8 [CLEAR] key
9 [START] key
10 [INTERRUPT] key
11 [CLEAR ALL] key
AR-M256/M257/M258/M316/M317/M318/5625/5631 EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 3
COPY
PRINT
SCAN
FAX
1 2
The machine status, messages and touch keys are displayed on the panel. The
display will show the status of printing, copying or network scanning according
to the mode that is selected.
Use to change modes and the corresponding display on the touch panel.
Press to select copy mode.
[PRINT] key: Press to select print mode.
• ONLINE indicator: Print jobs can be received when this indicator is lit.
• DATA indicator: A print job is in memory. The indicator lights steadily while
the job is held in memory, and blinks while the job is printed.
[SCAN] key: Press to select network scan mode when the network scanner
option is installed.
• DATA indicator: Lights steadily or blinks while a scanned image is being sent.
[FAX] key: Press to select fax mode when the fax function is installed.
• LINE indicator : This lights up while faxes are being sent or received.
• DATA indicator: Blinks when a fax has been received to memory and lights
steadily when a fax is waiting in memory for transmission.
Press to display the current job status.
Use to adjust various settings of the machine including the contrast of the touch
panel and key operator programs.
Use to enter numeric values for various settings.
When auditing mode is enabled, press this key after finishing a job to return the
machine to account number entry standby.
Use this key to execute a job program in copy mode. The key is also used to
dial in fax mode.
Press to clear a copy number setting or cancel a job.
Press in copy mode, scanner mode, or fax mode to begin copying, network
scanning, or faxing.
This key blinks when auto power shut mode has activated. Press the key to
return to normal operation.
Use to perform an interrupt copy job.
Resets the settings to the initial settings.
ON LIN E
DATA
DATA
LIN E
DATA
CUST OM SETTINGS
JOB STATUS
AC C. #-C
3 4 5 6
Function/Operation
7 8 9 10 11
Note
When the network
scanner option is
installed.
When the fax option is
installed.