C. Ar-Pf1/Pf2; D. Mx-Nsx1 - Sharp AR-M256 Service Manual

C. AR-PF1/PF2

(1) Parts included
AR-PF1
Bar code board: 1 pc.
AR-PF2
Flash ROM board: 1 pc.
(2) Installation
Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1) Remove the shielding plate.
Remove five screws and remove the shielding plate.
Screws
Screws
2) Attach the bar code board/flash ROM.
Attach the bar code board/flash ROM board to CN7 of the printer
board.
Bar code board/
Flash ROM board/
Font ROM board
AR-M256/M257/M258/M316/M317/M318/5625/5631 UNPACKING AND INSTALLATION 5 - 7
CD-ROM: 1 pc.
Operation manual
Installation caution sheet
Operation manual
Installation caution sheet
3) Attach the shielding plate.
Attach the shielding plate using the five screws.
Screws
Screws
Insert the power plug of the copier to the outlet and turn on the
main switch. Then, carry out the following procedure.
4) Check the bar codes. (AR-PF1 only)
Use the operation keys on the operation panel to print the PCL font
list from the test page printing.
Check that the optional font list is printed at the end.
(3) Font list
Font
Font name
No.
1 Code128TT-Regular
2 Code128-NarrowTT-Regular
3 Code128-WideTT-Regular
4 Code39HalfInch-Regular
5 Code39OneInch-Regular
6 Code39QuarterInch-Regular
7 Code39SmallHigh-Regular
8 Code39Slim-Regular
9 Code39SmallLow-Regular
10 Code39SmallMedium-Regular
11 Code39Wide-Regular
12 Codabar-Regular
13 Interleaved2of5-Regular
14 Interleaved2of5-Thin-Regular
(4) Check when installing the AR-PF2
Check can be made by print out of the printer setting list.
The expansion font item in the printer setting list is changed from "unin-
stalled" to "download font."

D. MX-NSX1

(1) Packed items
This network scanner kit includes the following items in the package.
• CD-ROM (Network Scanner Tool and Sharpdesk, Installer, Sharp
TWAIN driver, etc.)
• Installation caution sheet and Operation Manual (License numbers
of 10 user clients of Sharpdesk are specified.)
(2) Installation procedure
To use the scanner expansion kit, a S.O.DIMM memory module (128
MB or more) is needed.
If no memory is added, an S.O.DIMM module must be mounted on
PCL PWB.
For the mounting method and the memory capacity, see below.
To enable the scanner function, the product key must be acquired.
(For the method of acquiring the product key, contact the SHARP
authorized dealer.)
Font
Font name
No.
15 OCR-A
16 OCR-B
17 OCR-B-C39-Regular
18 Upc-Half
19 Upc-Half-Bars
20 Upc-HalfMusic
21 Upc-HalfNarrow
22 Upc-HalfThin
23 Upc-Tall-Regular
24 Upc-TallBarsThin-regular
25 Upc-TallMusicThin-Regular
26 Upc-TallNarrow-Regular
27 Upc-TallThin-regular
28 ZipCodeBarcode-Regular