Setting Up The Printer For Apple Macintosh Computers; When Using The Optional Rs-100M Serial Interface - Brother HL-1070 Service Manual
Hide thumbs
Also See for HL-1070:
- User manual (93 pages) ,
- Parts reference list (18 pages) ,
- Technical reference manual (517 pages)
Table of Contents
Advertisement
USER'S GUIDE
Setting Up the Printer for Apple Macintosh Computers
When Using the Optional RS-100M Serial Interface
Question
I cannot print from my
application software.
Recommendation
Make sure that the supplied Macintosh printer
driver is installed in the System Folder and it is
selected with Chooser.
Check the PORT selection within the Chooser: it
should match the port to which you physically
attached the printer cable.
The serial slide switch of the optional interface
board should be in the Apple (RS-422A) position.
Check the printer cable type: you cannot use a
LocalTalk or straight-through cable. Refer to
Chapter 4
for details on printer cable type.
6–12
Advertisement
Chapters
Table of Contents
Troubleshooting
