Brother HL-1070 Service Manual page 173

USER'S GUIDE
Remarks
Recommended paper
Cut sheet: Xerox 4200 (in USA) / Xerox 80 Premier Paper
(in Europe) or equivalent
Label: Avery laser label or equivalent
Transparency: 3M PP2500 / Avery 5282 (in USA) / STABILO 7250
(in Europe) or equivalent
It is recommended that you test paper, especially special sizes and types
of paper, on this printer before purchasing large quantities.
Avoid feeding labels with carrier sheets exposed (sheets with labels
previously removed), or your printer will be damaged.
Avoid using coated paper, such as vinyl coated paper.
Avoid using preprinted or highly textured paper.
Use a recommended type of paper, especially plain paper and
transparencies, for optimum printing. For more information on paper
specifications, consult your nearest authorized sales representative or the
place of purchase of your printer.
We recommend you use label or transparencies which are designed for
use in laser printers.
We recommend you use long-grained paper for the best print quality.
If the paper has problems feeding from the multi-purpose sheet feeder,
use the manual feed slot and try again.
You can use recycled paper in this printer.
Before using paper with holes such as organizer sheets, you must fan the
stack well to avoid paper jams and misfeeds.
Before using any paper, make sure that it is not curled. If it is, you should
straighten the paper as much as possible. Feeding curled paper can cause
paper jams and misfeeds.
Fig. 2-1 Fan the Paper and
Straighten the Paper
2–2