Brother HL-1070 Service Manual page 52

(9)
(10)
(11)
(12)
(13)
Note:
Bind B tight 3x10
Connector plate
Download Free Service Manual and Resetter Printer at http://printer1.blogspot.com
Release the right side of the paper eject roller shaft.
Remove the four eject pinch rollers and the pinch springs from the fixing unit
frame. Then, remove the pinch spring from each pinch roller.
Paper eject roller shaft
Remove the bind B tight 3 x 10 screw securing the connector plate.
Remove the connector plate from the fixing unit frame and loosen the other bind B
tight 3 x 10 screw securing the fixing unit cover.
After removing the idle gear 16 from the fixing unit frame, the heat roller can be
removed. You can then remove the halogen heater lamp from the heat roller.
Never touch the surface of the halogen heater lamp.
Halogen heater lamp
(Blue 100V, Read 200V)
Eject Pinch Roller
Fig. 3.18a
Heat roller
Idle gear 16
Fig. 3.19
III-12
PR98292
Pinch Spring
Bind B tight
Fixing unit frame