Replacing The Drum Unit - Brother HL-1070 Service Manual

USER'S GUIDE

REPLACING THE DRUM UNIT

The printer uses a drum unit to create the print images on paper. If the
Drum lamp is on, it indicates the drum unit is nearly at the end of its life.
We recommend you prepare a new drum unit to replace the current one.
Even if the Drum lamp is on, you may be able to continue to print
without replacing the drum unit for a while. If there is a noticeable
deterioration in the output print quality even before the Drum lamp
lights, then the drum unit should be replaced.
Fig. 5-9 Drum Unit Nearly at the End of its Life
!
Caution


When removing the drum unit, handle it carefully as it may contain
toner.


You should clean the printer when you replace the drum unit.
"CLEANING THE PRINTER"
Note
The drum unit is a consumable, and it is necessary to replace it
periodically.
There are many factors that determine the actual drum life, such as
temperature, humidity, type of paper and toner that you use, the number
of pages per print job, etc.. The drum life is estimated at approximately
20,000 pages at 20 pages per job and 8,000 pages at 1 page per job. The
actual number of pages that your drum will print may be significantly less
than these estimates. Because we have no control over the many factors
that determine the actual drum life, we cannot guarantee a minimum
number of pages that will be printed by your drum.
For best performance, use only genuine Brother toner, and the product
should only be used in a clean, dust-free environment with adequate
ventilation.
in this chapter.
5–6
See