Connection Of Printer With Macintosh Pc (Apple Computer); Installing Printer Driver Onto Your Pc - Brother GT-3 Series Instruction Manual

2

Connection of printer with Macintosh PC (Apple Computer)

This chapter provides information about the procedures to install the GT-3 printer driver onto your PC.
If you connect an USB 2.0 cable to your PC after these installation procedures are completed, make your setting by
following the procedures described in the "2-2. Connecting the printer to your PC via a USB 2.0 cable >>P.2-2". If you
want to perform a network printing, establish a network printing setup in accordance with the "2-3. Connecting the printer
to your PC via a LAN cable >>P.2-4".

2-1. Installing printer driver onto your PC

To begin with, onto your PC, install the printer driver for file output, Brother GT-3 FileOutput.
At this stage, do not connect the printer to your PC yet.
<TIPS>

You must log into your PC with administrator privileges.
(1) Activate the PC.
(2) Complete all of the current sessions.
(3) Double-click on the [BrotherGT-3_ver***.pkg] to execute installer.
(4) Then, the installation procedures will begin. Follow the on-screen instructions to complete the installation.
(5) After the installation is completed, reactivate the PC.
2-1