White Balance Check; Mechanical Shutter Adjustment; Mechanical Shutter Data Input (Dcr-Trv6/Trv6E/Trv11/Trv11E); (Dcr-Trv6/Trv6E/Trv11/Trv11E) - Sony DCR-TRV6 Service Manual

16. White Balance Check

Subject Clear chart (Color reproduction
adjustment frame)
Filter Filter C14 for color temperature
correction
ND filter 1.0 and 0.4 and 0.1
Measurement Point Video output terminal
Measuring Instrument Vectorscope
Specified Value Fig. 5-1-13. A to C
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu display) ................................... OFF
Checking method:
1) Check that the lens is not covered with either filter.
2) Select page: 6, address: 01, set data: 0F, and press the PAUSE
button of the adjustment remote commander.
3) Check that the center of the white luminance point is within
the circle shown Fig. 5-1-13. (A).
4) Select page: 6, address: 01, set data: 23, and press the PAUSE
button.
5) Place the C14 filter on the lens.
6) Check that the center of the white luminance point settles in
the circle shown Fig. 5-1-13. (B).
7) Remove the C14 filter, and place the ND filter 1.5 (1.0+0.4+0.1)
on the lens.
8) Check that the white luminance point stopped moving, and then
remove the ND filter 1.5.
9) Check that the center of the white luminance point settles within
the circle shown Fig. 5-1-13. (C).
Processing after Completing Adjustments:
1) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
2mm
Fig. 5-1-13. (A)
1.0mm
1.0mm
Fig. 5-1-13. (B)
3mm
3mm
1.0mm
Fig. 5-1-13. (C)
R-Y 2mm
B-Y
R-Y
B-Y
3mm
3mm
R-Y
2.0mm
B-Y

17. Mechanical Shutter Adjustment

Adjust the period which the mechanical shutter is closed, and
compensate the exposure.
17-1. Mechanical Shutter Data Input

(DCR-TRV6/TRV6E/TRV11/TRV11E)

Adjustment Page
Adjustment Address
Input method:
1) Select page: 0, address: 01, and set data: 01.
2) Input the following data to page: F, addresses: 70 to 84.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address Data
70 C4
71 0E
72 75
73 0C
74 26
75 0B
76 35
77 0A
78 6E
79 09
7A A5
7B 61
7C A1
7D 79
7E 64
7F 81
80 82
81 84
82 B5
83 7B
84 20
3) Input the following data to page: 7, addresses: 23 to 26.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address Data
23 7C
24 7F
25 7C
26 7B
4) Select page: 0, address: 01, and set data: 00.
5-31
F 7
70 to 84 23 to 26