Operation; Front Panel Pushbuttons; Keyboard Hotkeys - StarTech.com SV211KDVI Instruction Manual

Operation

There are three methods to control your KVM Switch for PC and Audio/
Mic channel selection: front panel pushbuttons, hotkey sequences or
the KVM Switcher Software.

Front Panel Pushbuttons

The front panel pushbuttons provide direct control over KVM switch-
ing operation. Simply press the button to switch to the corresponding
PC port (as well as the audio/mic channel ports if binding is enabled).
By default, PC port switching and audio/mic port switching are bound
together, unless you bind the audio to a specific port.
Please note: You can use the front panel pushbuttons to switch to
an empty port (not connected to a slave computer), but the keyboard
hotkeys or KVM Switcher Software cannot perform the same function.

Keyboard Hotkeys

Please note: Each keystroke within a hotkey sequence should be
pressed within two seconds. Otherwise, the hotkey sequence will not
be validated.
Please note: After switching ports, you must wait until the KVM
Switcher icon updates accurately in the taskbar, before switching again.
Please note: Hotkeys are only functional while the computer is operat-
ing system is running. If you wish to switch computer control during the
boot phase, please use the front panel pushbuttons as necessary.
User Definable Hotkeys: Ctrl + Alt + [command key]. Please note that
these three keys must be pressed simultaneously. Upon the release of
the keys, the switching action will be executed.
Universal Hotkeys Sequence: Scroll Lock + Scroll Lock switches to
the next port.
5