StarTech.com SV211KDVI Instruction Manual page 10

To change the command key, simply enter it into the field provided in
the Configuration Dialog Box. Depending on the command key you've
designated in the KVM Switcher Software, to switch to PC 'x':
Hotkey sequence = Ctrl + Alt + [command key]*
*The default hotkey setting is CTRL + ALT + 1/2 for PCs 1 and 2.You
can also use Scroll Lock + Scroll Lock to switch to the other computer
Please note: If you intend to modify the command key, you have to
modify them on each of the computers connected to the switch.
Start Auto-scan
Right-click the KVM Switcher icon in the taskbar to evoke the operating
menu, then select Start Auto-scan to activate auto-scanning.
Stop Auto-scan
While auto-scanning, right-click the KVM Switcher icon to evoke the
operating menu, then select Stop Auto-scan to de-activate auto-
scanning. Alternatively, you can press any button on the front panel to
stop this function.
KVM Switcher Configuration
Right-click the KVM Switcher icon and select Settings or double-click
the icon to bring up the configuration dialog box.
Fix Audio Port at PC x
Check this option, then select the PC to which you wish to fix the
audio/mic channel. Once selected, the audio/mic channel will be fixed,
and become non-switchable.
Auto-scan Period
Select the Auto-scan period from 10 - 60 seconds, available in incre-
ments of 5 seconds. This setting will define the length of time the KVM
Switch will wait before switching to the next PC.
7