Software Installation - StarTech.com SV211KDVI Instruction Manual

Software Installation

This section details how to install the optional software, as well as how
to make the necessary physical connections between your peripherals
and the KVM switch. For best results, ensure that all of the computers
to be controlled are located as close as possible to the KVM switch and
console peripherals (monitor, keyboard, mouse), as this will reduce the
length of cabling required and reduces the chance of interference.
KVM Switcher Software
1. For each computer that will be connected to the KVM switch, please
insert the companion CD ROM into your CD drive. The installation
program USBKVMIn.exe should run automatically, however if it does
not, please locate the file on the disk and double-click on the icon to
launch the application:
Please note: If the installation software does not launch from the in-
cluded Software CD, please copy it to your local hard disk and attempt
to install it locally.
Please note: The KVM Switcher software is recommended for use on
computers running Windows
or higher.
2. When the software Welcome Screen appears, please click on
Software Installation for Windows/Mac to begin installation, and
follow the on-screen instructions to completion. Once the software
has been installed, you will see a KVM Switcher icon on the system
tray of your desktop. Right-click on the icon to launch the operation
menu, or double-click to evoke the configuration box.
KVM Switcher Icon (Windows)
KVM Switcher Icon (Mac OS)
®
98SE or higher, or Mac OS
3
®
10.4 (Tiger)