Operation
There are three methods to control your KVM Switch for computer selection:
1. QuickSwitch Button - A wired remote control for direct switching control. Simply
press the button to toggle between the two computers.
2. KVM Switching Software (Windows & Mac platform) – See "Quick Reference Sheet"
below for details
3. Keyboard hotkeys – For Windows, the computer toggle key combination is "Scroll
Lock, Scroll Lock". For Mac, please refer to Define Hotkey Preceding Sequence in the
Quick Reference Sheet.
Note: Each keystroke hotkey sequence should be pressed within two seconds,
otherwise, the hotkey sequence may not be validated.
Hotkey Quick Reference Guide
Command
Select PC Port
Previous PC
port
Next PC port
Define Hotkey
Preceding
Sequence
Instruction Manual
Switcher Software
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Right-click the KVM Switching icon
to evoke the operation menu, then
select whichever computer that is
available for switching.
Right-click the KVM Switching
icon to evoke the operation menu,
then select Settings (Windows) /
Configuration Dialog Box (Mac OS).
3
Description
Select the active PC port
Select the previous
connected PC port
Select the next
connected PC port
User–definable hotkeys
sequence for computer
selection is "Ctrl +Alt+
[command key]".
For Mac, instead of Scroll
Lock key, you may use
User-definable hotkey
sequence to switch.
Need help?
Do you have a question about the 8STSV211USB and is the answer not in the manual?
Questions and answers