Configuring The Network Mailbox For Fast Access - Siemens Gigaset A580IP Manual

Configuring the network mailbox for fast access

With fast access you can dial a network mailbox directly.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different mailbox to
key on each registered handset.
No mailbox is preconfigured for fast access in the default settings.
Preconditions:
u
At least one receive number is assigned to the handset.
u
The corresponding network mailbox has been entered and activated for at least
one of the receive numbers on the handset.
Or:
¢
§Menu§
s
The selection includes the network mailboxes that belong to a VoIP/fixed line net-
work connection and whose phone number is assigned to the handset as a receive
number. Net AM: xxx are displayed, where xxx is replaced by the respective stand-
ard name of the connection (IP1 to IP6, Fixed Line).
If a number has already been saved to the base station for the selected network
mailbox, fast access is activated.
a
If no number has been saved for the network mailbox the message Not possible! is
displayed. You then have to first enter the mailbox number using the Web configu-
£
rator (
Please note
You can only assign fast access to one mailbox.
However, you can also call the network mailbox assigned to a handset's receive
numbers directly via the message key (
Calling the network mailbox and listening to messages
If you have set a network mailbox for fast access you will be connected directly to
this network mailbox (external call).
d
You will hear the answering machine announcement.
Fast access has not yet been set on the handset:
Press and hold key .
¢
Voice Mail Set Key 1
§OK§
Select and press
Select network mailbox and press
Press and hold (idle status).
Page 143).
Press and hold.
If necessary, press the handsfree key.
.
‰
§OK§
(
£
Page 80).
Using the network mailbox
= on).
79