Operating The Base Station On The Pabx; Changing The Dialling Mode; Setting Recall - Siemens Gigaset A580IP Manual

Operating the base station on the PABX

The following settings are only necessary when your PABX requires them; see the
PABX user guide. The settings only affect fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.

Changing the dialling mode

You can set the dialling mode.
¢
§§Menu§
Tone / Pulse
a
Please remember
u
Suffix dialling (for selecting the connection) is not possible in conjunction with
pulse dialling: a hash "#" is displayed during dialling but ignored when pulse
dialling is used.
u
Enter an asterisk "*" to switch temporarily to tone dialling. The asterisk is not
displayed.

Setting recall

Your phone is preset at the factory for operation on the main connection (recall 250
ms). For operation on a PABX, you may have to change this value. Please refer to the
user guide for your PABX.
¢
§Menu§
q
The current setting is indicated by ‰.
a
¢ ¢
Settings Base
§OK§
Select and press
Press and hold (idle status).
¢ ¢
Settings Base
Select recall and press
Press and hold (idle status).
Operating the base station on the PABX
¢
Telephony Fixed line
(‰ = on).
¢
Telephony Fixed line
§OK§
.
¢
Dialling Mode
¢
Recall
107