Siemens Gigaset A580IP Manual page 167

Customer Service & Assistance
Status
code
0x413
0x414
0x415
0x416
0x420
0x421
0x423
0x480
0x481
0x482
0x483
0x484
0x485
0x486
0x487
0x488
0x491
0x493
0x500
0x501
0x502
166
Meaning
Message is too long.
URI is too long.
Query format is not supported.
URI is faulty.
Incorrect ending
Incorrect ending
The requested service is not supported by the VoIP provider.
The dialled number is temporarily unavailable.
The recipient is not available.
Double service query
Too many "jumps":
The query was rejected because the service server (proxy) has decided that this
query has already passed through too many service servers. The maximum
number is defined beforehand by the original sender of the query.
Wrong number:
In most cases this response means that you have simply omitted one or more dig-
its in the phone number.
The URI dialled is not unique and cannot be processed by the VoIP provider.
The called party is busy.
General faults:
The call was cancelled before a call was established. The status code confirms
receipt of the interruption signal.
The server cannot process the query because the data entered in the media
description is not compatible.
The server notifies that the query will be processed as soon as a previous query has
been completed.
The server rejects the query because the phone cannot decrypt the message. The
sender has used an encryption method that neither the server nor the receiver
phone can decrypt.
The proxy or the receiving device has discovered a fault while executing the query.
It is therefore impossible to execute the query. If this occurs, the caller or the
phone displays the fault and repeats the query after a few seconds. The number of
seconds after which the query can be repeated may be transmitted to the caller or
phone by the receiving device.
The query cannot be processed by the recipient because the recipient does not
have the functionality that the caller requires. If the recipient understands the
query but does not process it because the sender does not have the necessary
rights or the query is not permitted in the current context, status code 405 is trans-
mitted instead of 501.
In this case, the receiving device that transmits this error code is a proxy or a gate-
way and has received an invalid response from its gateway via which this query is
to be processed.