Siemens Gigaset A580IP Manual page 128

Area: General Provider Data
If you have downloaded the general settings for the VoIP provider from the Gigaset
configuration server (
the data from the download. Generally speaking, you do not need to configure any
settings in this area.
Domain Specify the last part of your SIP address (URI) here (maximum 74 characters).
Example
For the SIP address "987654321@provider.com", enter "provider.com" in Domain.
Proxy server address
The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the
(fully-qualified) DNS name of your SIP proxy server (maximum 74 characters).
Example: myprovider.com.
Proxy server port
Enter the number of the communication port that the SIP proxy uses to send and
receive signalling data (SIP port).
Port 5060 is used by most VoIP providers.
Registrar server
Enter the (fully-qualified) DNS name or the IP address of the registrar server (maxi-
mum 74 characters).
The registrar is needed when the phone is registered. It assigns the public IP
address/port number to your SIP address (Username@Domain) that were used by
the phone on registration. With most VoIP providers, the registrar server is identical
to the SIP server. Example: reg.myprovider.com.
Registrar server port
Enter the communication port used in the registrar. It is mainly port 5060 that is
used.
Registration refresh time
Enter the time intervals at which the phone should repeat the registration with the
VoIP server (SIP proxy) (a request will be sent to establish a session). The repeat is
required so that the entry of the phone in the tables of the SIP proxy is retained and
the phone can therefore be reached. The repeat will be carried out for all activated
VoIP phone numbers.
The default is 180 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.
Web configurator – Setting the phone using a PC
£
Page 124), then the fields in this area will be preset with
127