Copying The Date/Time From Time Server - Siemens Gigaset A580IP Manual

Web configurator – Setting the phone using a PC

Copying the date/time from time server

The date and time are shown in the idle display of registered handsets. They are
important, for example, for stating the correct time in the calls list and for the "alarm
clock" function.
There are two methods for updating the time and date on your base station: man-
ually with one of the registered handsets (
nisation with a time server on the Internet.
Activate/deactivate synchronisation with a time server as follows:
¤
Open the following Web page: Settings
¤
In the Automatic adjustment of System Time with Time Server field select Yes
to activate synchronisation between base station and a time server. If you select
No the base station will not adopt time settings from a time server. In this case
you should set the time and date manually using a handset.
¤
The Last synchronisation with time server field shows the last time the base
station compared the time and date settings with a time server.
¤
In the Time Server field, enter the Internet address or name of the time server
from which the base station should adopt its time and date settings (maximum
74 characters). The time server "europe.pool.ntp.org" is set as default on the
base station. You can overwrite the setting.
¤
From the Country list, select the country in which your base station is being
operated.
¤
The Time Zone field shows the valid time zone for the Country. It shows the
deviation between local time (not summer time) and Greenwich Mean Time
(GMT).
If a country is divided into various time zones, they will all appear in the list.
Select the appropriate Time Zone for the base station from the list.
¤
The Automatically adjust clock to summer-time changes field will be displayed
if your time zone differentiates between summer time and standard time.
Select On if you want the time to change automatically to summer time or
standard time when summer time begins and ends respectively.
Select Off if you do not want to change to summer time.
Please note: If the date and time are updated by a time server that automatically
switches between summer time and standard time, you must always select Off
here.
¤
Select the Set button to save the settings in your phone.
Once you have activated synchronisation, the time and date will be compared with
a time server as soon as an Internet connection is established.
Synchronisation will usually occur once a day (at night) if synchronisation is acti-
vated. Any additional synchronisation will take place only after each new system
start of the base station (e.g. after a firmware update or a power cut).
If you register a new handset on your base station it will assume the time and date
of the base station without any additional synchronisation with the time server.
Date and time settings are transferred to every handset after synchronisation.
158
£
Page 14) or automatically by synchro-
¢
Miscellaneous.