Table of Contents
Advertisement
Installing the MERLIN Identifier System
Setting Up the Telephone Lines
The MERLIN Identifier system lets you attach MERLIN Identifier
Displays to up to four Central Office telephone lines. The MERLIN
Identifier Display shows the last two digits of the telephone line
numbers you set up.
To assign telephone numbers, follow the instructions below:
1.
Enter the Administration password.
Enter
Z
2.
Enter the number, 1–4, of the telephone line you want to set.
3.
4.
Enter the last four digits of the telephone line number.
You must enter all four digits even though only the last two
digits show on the MERLIN Identifier Displays.
5.
Repeat Steps 3 and 4 for each line number to be monitored
by a MERLIN Identifier Display.
6.
Press <Esc> to exit the System Parameter menu.
Setting Up the Printer Serial Port
Serial printers require one of the following line terminations:
Carriage return (<CR>)
Carriage return plus a line feed (<CR><LF>)
To set up the MERLIN Identifier Control Unit printer port, follow the
instructions below:
Verify the line termination required by the printer.
1.
2.
Enter the Administration password.
STEP 7: Set Up MERLIN Identifier Parameters
30
to access the System Parameter menu.
Advertisement
Table of Contents
