Table of Contents
Advertisement
Installing the MERLIN Identifier System
Connect the RJ45-to-DB9 adapter labeled "Printer Port
2.
Controller For use with Printer only" to the MERLIN Identifier
Control Unit port labeled "Serial Printer."
Connect the RJ45-to-DB25 adapter labeled "Serial Printer"
3.
to the printer's serial port.
Do one of the following:
4.
If the serial printer is in the same room as the MERLIN
Identifier Control Unit, connect a modular cord with
RJ45 plugs directly between the "Printer Port
Controller For use with Printer only" adapter and the
"Serial Printer" adapter.
If the serial printer is in a separate room, connect a
modular cord with RJ45 plugs directly between the
"Printer Port Controller For use with Printer only"
adapter on the MERLIN Identifier Control Unit and its
designated wall jack. Then connect a modular cord
with RJ45 plugs directly between the "Serial Printer"
adapter on the serial printer and its designated wall
jack.
5.
Connect the power cord to the printer or PC and an AC
power outlet.
6.
Reconnect the MERLIN Identifier Control Unit power cord.
Be sure to follow the instructions in "Setting Up the Printer Serial
Port" in "STEP 7" to set up the correct line termination required by
the serial printer.
24
STEP 6: Connecting Administrative Components
Advertisement
Table of Contents
