CyberData VoIP V2 Specifications page 3

VoIP V2 Loudspeaker Amplifier
Configuring the V2 Loudspeaker Amplifier for Alarm Sensing
User can upload an audio message
to the Loudspeaker Amplifier.
When the "Sense-In" is activated, the stored
Audio file will play out the local speaker and
repeat until the condition is cleared.
The Loudspeaker Amplifier can also call a
pre-set phone number and when that phone
answers, the stored Audio message will
also be played to the phone.
Alert Strobe
AC or DC
Power Source
CyberData Corporation
Window Reed switch is connected
to the "Sense-In" connection.
V2 Loudspeaker Amplifier with Strobe Alert
High PIV UltraFast
Solid State
Switching Diode
or
Mechanical
Relay
OUT
IN
Output Contacts
AC or DC rated
Depending Upon
Controlled Device
Requirements
V2 Loudspeaker Amplifier Connections
CLASS II WIRING
3 Justin Court, Monterey, CA 93940

When the V2 Loudspeaker
Amplifier is called from a remote
phone, the relay on the paging
amplifier can be programmed to
blink and drive an Alert Strobe.
+
-
DC
POWER SUPPLY
( )
MAX.
30 VDC @ 1A
Loudspeaker Amplifier
831.373.2601 Fax: 831.373.4193
 
IP Phone
Window Reed Switch
www.cyberdata.net
