Installing 'C' Batteries Into The Tender - Lionel The Polar Express G-gauge Owner's Manual

Battery installation and options

Installing 'C' batteries into the tender

O
pen the battery compartment by sliding the locking tab forward on the top rear of the
tender. Then lift tender lid by curved angled rib and pulling backward. Install 6 'C' size
alkaline batteries into the battery compartment. Please be sure the +/- of each battery is
positioned as shown in the battery compartment. See Figure 4
When replacing the original batteries use Alkaline 'C' batteries. Use only new batteries.
Never mix new and used batteries or use different types together.
Close the battery compartment by inserting the slot on the front end of the tender lid onto
the retaining rib. Then lower the back end of the lid and secure by sliding the locking tab
forward.
FRONT
Figure 4. Installing the batteries in the tender
Remove all batteries when the train will not be used for an
Important!
extended period of time.
FRONT
7
Meijer.com
Locking tab
REAR
REAR