Installing 'C' Batteries Into The Tender - Lionel G-Gauge Steam Set Owner's Manual

Battery installation and options

Installing 'C' batteries into the tender

U
sing a Phillips Head screwdriver, have an adult loosen the screw on the battery
compartment cover. Once the battery cover has been removed install 6 'C' Alkaline
Batteries (not included). Please be sure the +/- of each battery is positioned as shown in the
battery compartment. See Figure 5.
Use Alkaline 'C' batteries. Use only new batteries. Never mix new and used
Important!
batteries or use different types together.
Close the battery compartment by inserting the slot on the front end of the tender lid onto
the retaining rib. Then lower the back end of the lid and secure by tightening the Phillips
Head screw.
FRONT
REAR
Berkshire
Figure 5. Installing 'C' batteries in the tender
Remove all batteries when the train will not be used for an extended
Important!
period of time. Lionel's Limited Warranty does not cover damage to your
tender caused from leaking batteries.
Loosen screw
FRONT
REAR
Loosen screw
FRONT
REAR
8
REAR
FRONT
General