The Lionchief Plus Remote; Installing Aaa Batteries Into The Remote Control - Lionel LionChief Plus Owner's Manual

The LionChief Plus remote

Installing AAA batteries into the Remote Control

F
or safety purposes, you must use a Phillips screwdriver to access the battery compartment. Use a
Phillips screwdriver to remove the screw that secures the battery compartment hatch and lift
the hatch to access the battery compartment (as shown in Figure 2). Insert three AAA alkaline
batteries orienting the +/- as shown in the bottom of the battery compartment. Replace the battery
door and tighten the Philips head screw. Be careful to avoid overtightening the screw.
Use only Alkaline AAA batteries. Use only new batteries. Never mix new and used
Important!
batteries or use different types together.
Figure 2. Opening and closing the battery compartment
REMOVE ALL BATTERIES WHEN THE TRAIN WILL NOT BE USED FOR AN
Important
!
EXTENDED PERIOD OF TIME. LIONEL'S LIMITED WARRANTY DOES NOT
COVER DAMAGE TO YOUR REMOTE CAUSED FROM LEAKING BATTERIES.
When you are not operating the train, move the On/Off switch to the
Important
!
Off position to conserve the battery life.
Remove screw and remove
battery compartment hatch
6