Installation And Options Installing 'Aa' Batteries Into The Wireless Controller - Lionel The Polar Express G-gauge Owner's Manual

Battery installation and options
Installing 'AA' batteries into the wireless controller
Push the tab toward the door and lift to open battery compartment (as shown in Figure 5).
Insert two 'AA' batteries orientating the +/- as shown in the bottom of the battery
compartment. Replace the battery door by first inserting the two tabs at the top of the door
into the notches in the top of the battery compartment. Then close the door being sure the tab
lock closes securely. See Figure 3.
When replacing the original batteries use Alkaline 'AA' batteries. Use only new batteries.
Never mix new and used batteries or use different types together.
Figure 3. Opening and closing the battery compartment
Remove all batteries when the train will not be used for an
Important!
extended period of time.
6
Meijer.com