Power Switches On The Wireless Controller - Lionel The Polar Express G-gauge Owner's Manual

Operating your train

Power switches on the wireless controller

T
urn the power switch on the side of the wireless remote to the up or ON position. The red
light at the top of the speed dial will illuminate to tell you the controller is on.
Turn the power switch on the Wireless Controller to the down position or OFF when not in
use. The light at the top of the dial will go out to indicate the power is off. See Figure 6.
Leaving the Wireless Controller power ON when not in use will drain the controller's
Note!
battery.
Figure 6. Using the wireless controller
Power on light
9
Meijer.com