Connecting The Engine And Coal Tender - Lionel The Polar Express G-gauge Owner's Manual

Operating your train

Connecting the engine and coal tender

P
lace the engine on the track first. Be sure that all wheels are within the track rails. Next
insert the power plug into the receptacle in the center back of the engine platform. See
Figure 5.
The engine will not run without this power plug inserted into the engine.
Note!
Place the Coal Tender on the track behind the Engine and connect the couplers. Be sure all
the Coal Tenders wheels are all on the track rails.
Remove all batteries when the train will not be used for an
Important!
extended period of time.
Figure 5. Connecting the engine and the coal tender
8
Meijer.com
Connecting the
couplers