Honeywell HC900 Installation And User Manual page 76

I/O Module Installation and Wiring - I/O Installation Procedures
Step
5 Using the following
reference items:
Hybrid Control Designer
•
data
Documentation Aids
•
from Appendix A
• Labels in I/O Terminal
Block assemblies
• Wiring diagrams given
in this Section for each
type of I/O module
connect I/O wiring to the
terminal blocks for each IO
module.
Route wires through the
channel at left of the
terminal block, to exit
through the top or bottom
of the block.
6 Insert a wire-tie into the
top and/or bottom end of
the terminal block.
Form a bend in each wire
to provide strain relief, and
secure the wire bundle with
the tie.
66
Procedure
Barrier Terminal Block
Euro Terminal Block
HC900 Hybrid Controller Installation and User Guide
Comments Reference
Revision 5
9/03