Honeywell HC900 Installation And User Manual page 39

Honeywell hc900 hybrid controller installation and user guide
Hide thumbs Also See for HC900:
Table of Contents

Advertisement

Name/Acronym
Domain Name
A text name, appended to
the Host name.
DS1, DS3
Dedicated leased telephone
lines
DTE
Data Terminal Equipment
Ethernet
IEEE networking standard
802.3, which defines
configuration rules for an
Ethernet network
FTP
File Transfer Protocol
Filtering
Selection process used by a
Switch or a Bridge to
forward a message or block
its passage.
Firewall
Inter-network security
system
Firmware
Semi-permanent storage
medium.
Forwarding
Bridge or Switch, passing a
message from one network
to another, based on packet
filtering.
Framing
Dividing messages into
groups of bits, each group
having specific significance.
Host Name
The name assigned to
identify a computer
connected to a network.
Host Table
A list of TCP/IP Host
Names/IP Addresses for a
network
hostid
Host Identifier
Hub
See "Port Multiplier".
HTTP
Hypertext Transfer Protocol
Internet
A system of networks
(local, regional, national,
and international) linked by
TCP/IP.
Revision 5
9/03
Name/Definition
HC900 Hybrid Controller Installation and User Guide
Components and Architecture - Networking Basics Reference
Comments
Identifies a node as a member of a domain.
DS1 (T-1) carries 1.544 Mbps, DS3 (T-3) carries
44.736 Mbps
Computers, Controllers, and other devices that
communicate via networking devices.
10 or 100 Mbps, Baseband network that uses
various media (thick coax, thin coax, twisted pair,
or fiber optic cable).
Example: 10BaseT is 10 Mbps Twisted Pair.
Use for send and receive files between an FTP
client and an FTP Server.
The Switch or Bridge reads the content of a packet
(such as destination address) to determine whether
the message should be blocked or forwarded.
Application software that runs in a computer, or a
dedicated firewall device that includes a dedicated
computer and software. In either case, it is placed
in the data path between networks.
In some cases, the content of firmware is fixed, and
cannot be altered. In other firmware (e.g., Flash),
the content can be re-written.
See "Filtering".
Framing techniques vary with protocols used.
Typically, message data is preceded by an
identifying "header" and is followed by an error-
check sequence.
The name is resident in each Host computer.
The portion of the IP address (right part) that
uniquely identifies a Host device on a network.
Application-Layer protocol that controls
transactions between the web client and the web
server.
Access to the Internet is governed by a world-wide
set of rules. IP (Internet Protocol) addresses are
assigned by Internet Corporation for Assigned
Names and Numbers(ICANN)
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents