How To Use Scanner Drivers - Fujitsu fi-5530C2 Operator's Manual

1.4

How to Use Scanner Drivers

To scan documents with the scanner, a scanner driver and application supported by the driver are
prerequisites. This scanner is accompanied with two drivers; one is a TWAIN-compliant driver,
TWAIN Scanner Driver, and the other is an ISIS-compliant driver, ISIS Scanner Driver; and an
application named ScandAll PRO, which supports both the drivers TWAIN and ISIS.
In this section, how to use these drivers is described.
For information about how to use ScandAll PRO and how to invoke a scanner driver via ScandAll
PRO, refer to "ScandAll PRO V2.0 User's Guide".
■ TWAIN Scanner Driver
TWAIN Scanner Driver is a driver for scanning documents with the scanner based on a TWAIN-
compliant application.
Usually, you can configure the scanner settings in the scanner driver's setup dialog box, invoking a
scanner driver via an application. (Depending on the application settings, this setup dialog box may
not appear.)
HINT
TWAIN Scanner Driver Setup
Configure TWAIN Scanner Driver settings in the dialog box above.
Major setting items are listed below.
* For details on each function, refer to "TWAIN Driver Help."
12
How to invoke a scanner driver varies depending on the application. For
details, refer to the manual or help of the application you use.
For information about how to invoke a driver via ScandAll PRO, refer to
"ScandAll PRO V2.0 User's Guide".