6. Select an action and an application to be launched by the scanner button event.
In Windows XP, select an application from the [Start this program] drop-down list under
[Actions].
7. Click the [OK] button.
If you are using ScandAll PRO, refer to "ScandAll PRO V2.0 User's Guide".
If you are using an application other than ScandAll PRO, the setup of the computer is
completed here.
HINT
2.15 Scanning by Pressing the Scan Button on the Scanner
To link another button, perform steps 3 to 7 again.
fi-5530C2 Image Scanner Operator's Guide
2
75