Getting Status And Information; Library Settings; Partition And Drive Information - Tandberg Data StorageLibrary T40+ Series Installation And User Manual

Operator and Administrator can view information about the library by accessing items under the
Reports menu.
The Reports Menu Information is available from both the front panel interface (FPI) and remote
management interface (RMI). We recommend using the RMI to view the reports due to the limited
amount of information it is possible to display on the compact LCD screen on the FPI. Also, the FPI
reports show only a subset of the RMI reports.
The status information listed in this chapter constitutes the reports available from the RMI. For an
overview of the reports available from the FPI, please refer to

Library Settings

The Library Settings Report contains information on the following library settings:
Inquiry string
FPI Password - Enabled or Disabled
Menu Timeout - from 1 to 9
Barcode Scanner - Enabled or Disabled
Date and Time - Current date and time
Audible Alarm - enabled or disabled
Library Serial Number (Library SN)
Library Firmware Version (Library FW)
The path to open the library report from the

Partition and Drive Information

The Partitions Setting Report is a dynamic representation of the physical locations of various library
resources, including tape drives, magazine slots, partitions, and modules.
The following drive information is available from the Partitions Report:
Drive Vendor Name <value>
Drive Product Name <value>
StorageLibrary T40+ Series Installation and User Guide
8

Getting Status and Information

RMI is Reports > Library.
Figure 28.
8
71