Table of Contents
Advertisement
Configuration
Setting up Disk S.M.A.R.T. (Self-Monitoring Analysis and Reporting
Technology)
1.
2.
3.
4.
5.
6.
7.
Setting Up System Event Actions
The DVR can be set to react to system events. System events can:
•
•
•
Document 800-00918 Rev F
02/08
Highlight the Setup... field beside Disk S.M.A.R.T., and press
Setup screen appears.
Figure 3-74
S.M.A.R.T Setup Screen
Highlight Enable and press
Note
If Enable is turned Off, you are not be able to make changes to
any of the fields.
Highlight the field beside Check Time and press
Monthly, Weekly, and Daily.
If you select Monthly, you are asked to set the Day of the Month and the Time.
If you select Weekly, you are asked to set the Day of the Week and the Time.
If you select Daily, you are asked to set the Time.
Highlight the first field beside Temperature Threshold and press
UP and DOWN arrows to scroll through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature setting.
If the temperature of hard disk drive exceeds the defined threshold, the system
triggers an alert.
Highlight the second field beside Temperature Threshold and press
either ºC (Celsius) or ºF (Fahrenheit), and press
The field beside Last Check-Time displays the Date and Time of the last
S.M.A.R.T. check.
Highlight OK and press
screen without saving the changes.
Select Save and then press
be associated with an Alarm-Out connector
sound the DVR internal buzzer
notify a number of different devices.
to toggle between On and Off.
to accept the changes. Select Cancel to exit the
to save your changes.
. The S.M.A.R.T.
. You can select from
. Use the
.
. Select
99
Advertisement
Table of Contents
