Figure 4-4 Mouse Display Menu; Table 4-4 Mouse Display Menu Functions - Honeywell HRSD16 User Manual

Operation
Option Function
Spot Monitor... Allows you to select which cameras display on the spot monitor.
Zoom... Zoom in on the live image. While in the zoom mode, there are two ways to move
around the enlarged portion of the video (which is indicated by a rectangle):
•
•
Display Displays the Mouse Display menu, seen below in
Option
Camera
PIP, 2x2, 3x3, 4x4
Previous Group
Next Group
Edit Group
Document 800-00918 Rev F
02/08
Table 4-3 Right Mouse Button Menu Functions
Click inside the rectangle to move to another area of the image you want
enlarged.
Click and hold the mouse button on the enlarged video and drag the video.
Figure 4-4 Mouse Display Menu
Table 4-4 Mouse Display Menu Functions
Function
Clicking Camera and selecting the camera number is the same as pressing
the individual camera buttons on the front panel display the selected camera
full screen. When in the PIP display mode, click the right mouse button and
then select PIP to change the location and the size of the PIP.
Select PIP, 2x2, 3x3, and 4x4 to display the cameras in the selected
multi-view screen mode.
Click Previous Group to move to the previous page.
Clicking Next Group is the same as pressing the GROUP button on the front
panel which moves to the next page.
Selecting Edit Group supports the active cameo function. Select Edit Group
and choose a camera that you want to change display position (for example,
Camera A). Then, click the right mouse button to display the menu. If you
select another camera in the menu (for example, Camera B), the screen
displays Camera B instead of Camera A. When in the 4x4 format, Camera A
and Camera B switch positions.
Figure 4-4
109