Connecting The Dvr For Remote Access; Figure 2-6 Video Out Connector; Figure 2-7 Rs-232C Port; Figure 2-8 Network Port - Honeywell HRSD16 User Manual

Installation

Connecting the DVR for Remote Access

Connecting the RS-232C Port
An RS-232C port is provided to connect an external modem for remote monitoring,
configuration, software upgrades, and to connect a remote control keyboard. Use a
modem cable with a DB-9S (female) connector to connect to the DVR. See
Configuration
Connecting the Network Port
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5
cable with an RJ-45 jack to the DVR connector. The DVR can be networked with a
computer for remote monitoring, searching, configuration, and software upgrades. See
Chapter 3, Configuration
26
Figure 2-6 Video Out Connector
Note The VGA and Video Out (BNC) connectors may be connected to
individual monitors for simultaneous operation.
for how to configure the modem.
Figure 2-7 RS-232C Port
Note The DVR is not supplied with a modem cable, and many
modems are not supplied with cables. Ensure that you have the
correct cable when purchasing the modem.
Figure 2-8 Network Port
for configuring the Ethernet connections.
Chapter 3,