Table of Contents
Advertisement
Operation
#
Function
10
ALARM Button
13
PLAYBACK Button
16
Power LED
Turning on the Power
After installing the DVR (see
to start recording video.
Live Monitoring
As soon as the DVR completes its initialization process, live video shows on the
attached monitor. The default mode is to display all connected cameras at once.
To display live video full screen, press that camera button. The input of the chosen
camera displays until you enter another mode.
To cycle the DVR through the different display formats, press DISPLAY.
The DVR can be set to display full-screen video for a preset dwell time when an Event
occurs. Video from the lowest numbered camera associated with the event sensor is
displayed. The DVR returns to the previous screen format after the event monitoring
dwell time expires. While the event monitoring is activated, the monitoring for all other
subsequent events are ignored.
To release the current event monitoring and display the selected camera or to return to
the previous screen format, press individual camera buttons or DISPLAY during event
monitoring.
104
Table 4-1
Front Panel Controls
#
Function
11
CLIP COPY Button
14
HDD LED
17
USB Connectors
Chapter 2,
Installation), press POWER on the front panel
#
Function
12
PANIC Button
15
Network LED
Advertisement
Table of Contents
